A broken boiler can be a major inconvenience. No one likes sitting in a cold house without heating or hot water, but thankfully it is possible to fix a broken boiler yourself if you have to.
Here are four things you can try when your boiler stops working.
Check the Basics
The first thing that you should do is check the most obvious things: make sure that you have credit, and then check that your individual appliances are actually working (such as the hob). You should also check that the switches on the fuse box are on.
Check the Pressure
If you have checked the basics and everything looks fine, see if there is a problem with the thermostat or the pressure. Make sure that the programmer is switched on and that the thermostats are turned up. You should also check the heating pressure to make sure it is between 1.0 and 1.5 bar.
If the pressure is lower than this or higher than this, the boiler may be broken. Unfortunately, this could mean that the boiler needs replacing. If this is the case and you are looking for a professional who can help with boiler installation Gloucester, go to hprservicesltd.com/gloucester-boilers.
Have You Had a Power Cut?
Power cuts can also cause your boiler to switch off, and they are more common than they used to be, so this could be the cause of the problem. If so, you simply need to reprogram your boiler and it should start working again. This is a very easy fix, but many people don’t realise that their boiler stopped working because of a power cut.
Try Restarting the Boiler
If you have tried all of the above and your boiler still isn’t working, try restarting it. When you press the reset button have a look through the boiler pilot light to see if you can see a flame. If there isn’t a flame, this could mean that there is a problem with the boiler or the gas supply, so you will need to arrange for a professional to come around and take a look at the boiler. This may not be ideal, but it is essential to make sure that your home has hot water – especially if the weather is cold.